Biogas for meat processing plants

Slaughter residues — rumen content, blood, DAF fat — yield several times more methane per tonne than manure. The plant already pays for their removal and uses steam, hot water and power for cooling every day. Biogas pays here when disposal is expensive and the energy is used on site; where disposal is cheap, the economics are weak.

The conditions: a steady daily flow (in our model NPV turns positive from roughly 10 kt a year when disposal is paid for; at 5 kt it is still negative), pasteurisation of animal by-products, and land or an offtaker for the nitrogen-rich digestate.

What drives payback

Disposal cost

The more you pay today, the faster the payback — and this saving doesn't depend on energy prices.

Own consumption

Power and heat for refrigeration and steam replace purchased energy — the most valuable kWh you can make.

Pasteurisation

Mandatory for Category 3 material: adds CAPEX and heat use, but unlocks the feedstock.

Digestate

Rich in nitrogen: you need fields or agreements with farms, otherwise it is a cost.

What it takes to work

  • From ≈ 10 kt of residues a year
  • Pasteurisation (veterinary rules)
  • Year-round heat and power demand on site

Frequently asked questions

Can blood and rumen content be digested together?

Yes, in co-digestion. They are blended to avoid excess nitrogen and fat; the ratio is set after a laboratory analysis.

Is pasteurisation required?

Under EU rules, blood and offal are Category 3 and are pasteurised at 70 °C for 60 minutes with particles of at most 12 mm. Rumen and gut content are Category 2; the veterinary authority sets the treatment for them.

What plant size do I need?

Your feedstock sets it: a few thousand tonnes a year usually means 40–100 kW of electrical capacity. The calculator gives your range.