Guide for business owners

Biogas plant: cost, payback and how it works

A plain-language guide for farms, food processors, developers and municipalities: how a biogas plant works, what it costs, what drives payback, CHP vs biomethane, digestate and risks.

How a biogas plant works

Organic waste — manure, slaughter residues, whey, food waste, vinasse, palm-oil effluent — is fed into a sealed tank. Without oxygen, bacteria turn the organic matter into biogas: 50–65 % methane, the rest mostly CO₂. In a heated digester at about 38 °C this takes 25–35 days; in hot climates an unheated covered lagoon does the job more slowly and far more cheaply.

The gas is stored, cleaned of hydrogen sulphide and then burned in a CHP engine (power and heat), in a boiler (heat only), or upgraded to biomethane that can replace natural gas in the grid or as vehicle fuel. What is left — digestate — goes back to the fields as fertiliser.

What a biogas plant costs

Cost is driven by digester volume, digestate storage, feedstock preparation (pasteurisation, de-packaging), the CHP or upgrading unit and the grid connection — not by a catalogue kilowatt figure. Small plants have the highest cost per kW: a 50 kW plant is nowhere near five times cheaper than 250 kW.

Prices also differ by country: labour, permitting and construction costs in Germany or Denmark are not those of Poland, Turkey or India. Our model builds a component budget, applies a country factor and shows a range. Firm prices come from supplier quotes after a proper feasibility study.

What drives payback

Four things matter most: how much of the energy you use yourself (your own power and heat replace expensive purchases), what you pay today to get rid of the waste, how energy-dense the feedstock is, and scale.

Support schemes — feed-in tariffs, biomethane premiums, investment grants — can change the picture, but they change, close and come with conditions. That is why our verdict is always calculated without them and every scheme is shown as a separate case with its status and source.

CHP, boiler or biomethane

CHP pays when both power and heat are needed on site. A boiler is the simplest option if you only need heat. Biomethane needs a steady gas flow and either grid injection or a vehicle-fuel buyer. The smallest upgrading units take about 50–100 Nm³ of raw biogas per hour, but their cost per cubic metre falls steeply with size, so a single small farm rarely gets there, while a cluster, a developer or a large processor often does.

Digestate, methane and safety

Digestate is a valuable fertiliser only when there is land and a nitrogen allowance to spread it; otherwise it is a cost. Methane leaks eat both money and the climate benefit, so gas-tight storage and monitoring are essential.

A biogas plant handles explosive gas and toxic hydrogen sulphide. Design and operation require qualified engineers; a screening is only the first step.

Biogas by business type

Farming and aquaculture

Industry and food trade

Waste, wastewater and biogas facilities